Top 10 34 Shark Gas Fittings

0

Nowadays, there are so many products of 3/4 shark gas fittings in the market and you are wondering to choose a best one.You have searched for 3/4 shark gas fittings in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings 3/4 shark gas fittings which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

955 reviews analysed

1. SharkBite UC256LFA10 3/4" 90 Degree Elbow PEX Barb Fitting (10-Pack), Brass

SharkBite UC256LFA10 3/4" 90 Degree Elbow PEX Barb Fitting (10-Pack), Brass

Feature

Description

Style:3/4 inch |  Size:10 Pack

10 Pack, 3/4″, Lead Free Brass Barb Insert Elbow, For Connecting 2 Pieces Of 3/4″ Cross Link Polyethylene Pex Tubing At A 90 Degree Angle, Secure Barb Ends Of Fitting To Pex Pipe, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-826 Cinch Clamps and TV #608-743 Cinch Tool, Or Copper Crimp Rings and Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 and ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance and The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California and VT S152 Vermont Low Lead Restrictions.

2. Hydro Master 3/4-Inch IPS Isolator Tankless Water Heater Service Valve Kit with Pressure Relief Valve, Clean Brass

Hydro Master 3/4-Inch IPS Isolator Tankless Water Heater Service Valve Kit with Pressure Relief Valve, Clean Brass

Feature

3. SHINESTAR 12 Foot Stainless Steel Propane Hose Assembly with Both 3/8inch Female Flare Fittings for RV, Gas Grill, Fire Pit, Heater,etc

SHINESTAR 12 Foot Stainless Steel Propane Hose Assembly with Both 3/8inch Female Flare Fittings for RV, Gas Grill, Fire Pit, Heater,etc

Feature

Description

Which Device is Suitable for?

????- Can hook up RV or propane tank for your favourite gas grill, propane heater, stove, fire pit table, propane smoker and more.


How to Extend it if I Already Have a Propane Line?

????- If your’re trying to extend the hose on your propane line, you can use this in combination with a 3/8″ flare to 3/8″ male flare brass adapter


???? Product Specification

Length: 12 Foot

Connection: 3/8″ Female Flare x 3/8″ Female Flare Fittings

Hose Diameter: 5/16″ ID

Material: Stainless Steel Hose and Solid Brass Fitting

Working Pressure: 0-350 PSIG

CSA Certified: Pass

???? NOTE:

ONLY for outdoor use

– Pay attention to the sharp edges when unpackaging and installing, wear gloves will be better

4. WADEO 3/8 Inch Natural Gas Quick Connect Fittings, LP Gas Propane Hose Quick Disconnect Kit, 3/8 Inch Male Pipe Thread x 3/8 inch Female Pipe Thread, Portable and Suitable for BBQ Grills

WADEO 3/8 Inch Natural Gas Quick Connect Fittings, LP Gas Propane Hose Quick Disconnect Kit, 3/8 Inch Male Pipe Thread x 3/8 inch Female Pipe Thread, Portable and Suitable for BBQ Grills

Feature

5. Stanbroil One Stop Gas Appliance Hook Up Kit – Brass Gas Ball Valve and Flexible Gas Connector w/Fittings

Stanbroil One Stop Gas Appliance Hook Up Kit - Brass Gas Ball Valve and Flexible Gas Connector w/Fittings

Feature

Description

Along with everything needed for installing most gas appliances
On/off valve provides easy servicing of appliances or summer shutdown
5 Pieces kit includes: 22″ stainless flexible gas connector
1/2″female flare at both ends
1/2″ male Flare x 1/2″ NPT
1/2″ male flare x 3/8″ male NPT
1/2″ male flare x 3/8″ female NPT
Brass shut-off valve with 1/2″ female NPT x 1/2″ male flare
Fit for gas logs, garage heaters, gas stoves and wall mounted heaters

6. Flextron FTGC-YC-34-24P 24 Inch Flexible Epoxy Coated High BTU Gas Line Connector W/ 1 Inch Outer Diameter & 3/4 Inch FIP x 3/4 Inch MIP Fitting, Yellow/Stainless Steel, Excellent Corrosion Resistance

Flextron FTGC-YC-34-24P 24 Inch Flexible Epoxy Coated High BTU Gas Line Connector W/ 1 Inch Outer Diameter & 3/4 Inch FIP x 3/4 Inch MIP Fitting, Yellow/Stainless Steel, Excellent Corrosion Resistance

Feature

Description

Size:24 Inch

Flextron 24 Inch Flexible Epoxy High BTU Gas Line Connector features 1 Inch Outer Diameter & 3/4 Inch Female Iron Pipe (FIP) x 3/4 Inch Male Iron Pipe (MIP) Fittings. This gas connector is from YC34 series of connectors and is made of Yellow Coated Stainless Steel. Comes with certified design, Stamp of approval, full-length corrugations, strength, and flexibility, flared end adaptors. This connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair, and masonry products as well as UV rays and salt. FLEXSHIELD Epoxy coating provides extra corrosion protection from accidental contact with common household chemicals and consistent coverage provides protection along the entire length of the connector. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 Fahrenheit. Designed and engineered for safe, optimal flow rate.

Specifications:

  • Connector Length: 24 Inch
  • Diameter Size: 3/4 Inch Inner Diameter (1 Inch Outer Diameter)
  • End Configurations: 3/4 Inch FIP x 3/4 Inch MIP
  • Tubing: Stainless Steel 304 (ASTM A240)
  • Fitting: Zinc-plated Steel S45C
  • Coating: Epoxy
  • Rated Pressure: CSA Certified up to 0.5 psi
  • Rated Operating Temperature: -40°F to 150°F
  • 100% Leak Tested
  • 7. SharkBite U134LFA Straight Connector Plumbing Fitting, Male, 3/4 Inch by 3/4 Inch, MNPT, PEX Fittings, Push-to-Connect, Copper, CPVC

    SharkBite U134LFA Straight Connector Plumbing Fitting, Male, 3/4 Inch by 3/4 Inch, MNPT, PEX Fittings, Push-to-Connect, Copper, CPVC

    Feature

    Description

    Style:3/4-Inch

    Product Description

    SharkBite3/4 Inch by 3/4 Inch Straight Male Connector Connect pipe in seconds with relative ease using the SharkBite Push-To-Connect 3/4-Inch by 3/4-Inch Straight Male Connector with MNPT Adapter. The SharkBite plumbing fitting is the easiest way to join copper, CPVC, HDPE, or PEX pipe in any combination. With no soldering, clamps, glue required, its as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. The SharkBite Straight Coupling Plumbing Fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. CUT. PUSH. DONE. The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue. Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results. SHARKBITE is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.

    From the Manufacturer

    SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

    8. SharkBite 22185-0000LFA Ball Valve 3/4 Inch x 3/4 Inch, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT, brass

    SharkBite 22185-0000LFA Ball Valve 3/4 Inch x 3/4 Inch, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT, brass

    Feature

    Description

    Size:0.75 Inch

    Product Description

    Cash Acme 22185-0000LF 3/4″ SharkBite Lead Free Ball Valve Cash Acme 22185-0000LF 3/4″ SharkBite Lead Free Ball Valve Features:;Ball valve;Highly forged brass;Single lever control;Push fitting;Lead free;3/4″;CA/VT Compliant

    From the Manufacturer

    SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

    9. DORMONT A753/4-Inch Quick Disconnect

    DORMONT A753/4-Inch Quick Disconnect

    Feature

    Description

    Product Description

    A75, 3/4 INCH QUICK DISCONNECT. Dormont Genuine OEM replacement part. Dormont offers a full range of solutions for all your gas connectivity applications. Use genuine OEM parts for safety reliability and performance.

    From the Manufacturer

    A75, 3/4 INCH QUICK DISCONNECT. Dormont Genuine OEM replacement part. Dormont offers a full range of solutions for all your gas connectivity applications. Use genuine OEM parts for safety reliability and performance.

    10. Hyperikon Tankless Water Heater Electric 11kw, 180-250V Compatible, 106.7 Amps, 0-87 PSI, ETL Listed, NFS Approved with Integrated Temperature Sensor, Residential, Indoor

    Hyperikon Tankless Water Heater Electric 11kw, 180-250V Compatible, 106.7 Amps, 0-87 PSI, ETL Listed, NFS Approved with Integrated Temperature Sensor, Residential, Indoor

    Feature

    Conclusion

    By our suggestions above, we hope that you can found 34 Shark Gas Fittings for you.Please don’t forget to share your experience by comment in this post. Thank you!

    Home Previews
    Logo
    Enable registration in settings - general