Top 9 Hard Start Capacitor Kit Freezer

0

Finding your suitable readers for hard start capacitor kit freezer is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for hard start capacitor kit freezer including detail information and customer reviews. Let’s find out which is your favorite one.

586 reviews analysed

1. RCO410 3-in-1 Hard Start Capacitor Kit for Freezer & Refrigerator Compressors by PartsBroz – Replaces Part Numbers TJ90RCO410, AP4503017, 600-410, ERP410, HS410, RC0410, RCO-410, RCO410

RCO410 3-in-1 Hard Start Capacitor Kit for Freezer & Refrigerator Compressors by PartsBroz - Replaces Part Numbers TJ90RCO410, AP4503017, 600-410, ERP410, HS410, RC0410, RCO-410, RCO410

Feature

Description

A hard start kit increases the efficiency of your refrigerator or freezer’s compressor. Not only does this extend the life of your compressor, but it also helps you save money on your power bill. For DIYers, a three-in-one, pre-wired start kit like this one is your best option. It replaces all three electrical components at once, so you don’t have to worry about accidentally damaging the compressor with mismatched parts. Use it with any 1/4 to 1/3 sized compressor.<>

Fits Several Compressor Types

Use this high-quality exact equivalent hard start kit with nearly any residential or commercial refrigerator system. Compatible compressor types include: RSIR, CSIR, PSC, and CSR.

Replaces Several Part Numbers

Know what part number you’re looking for? This hard start kit replaces part numbers RCO410, HS410, TJ90RCO410, AP4503017, 600-410, and ERP410.

Please reach out to us if you have a question about compatibility. Comment below in the customer questions and answer section, or send us a message on the PartsBroz storefront. We’re happy to help ensure you select the right part number.

2. Supco RCO810 3 n’ 1 START Hard Start Kit

Supco RCO810 3 n' 1 START Hard Start Kit

Feature

Description

Product Description

This 3 in 1 start kit is for compressors with horse power of 1/12 through 1/5.

From the Manufacturer

This 3 in 1 start kit is for compressors with horse power of 1/12 through 1/5.

3. Supco URCO410-0 Pre-wired Capacitor

Supco URCO410-0 Pre-wired Capacitor

Feature

Description

Product Description

This pre-wired start kit includes a relay, capacitate, and overload device.

From the Manufacturer

This pre-wired start kit includes a relay, capacitate, and overload device.

4. Wadoy RCO410 3 in 1 Compressor Hard Start Capacitor Kit For Refrigerators & Freezers 1/4-1/3 H.P. 115VAC (1)

Wadoy RCO410 3 in 1 Compressor Hard Start Capacitor Kit For Refrigerators & Freezers 1/4-1/3 H.P. 115VAC (1)

Feature

Description

Specifications

●Replacement for model No. RCO410 (HS410)
●For compressor sizes 1/4 through 1/3 H.P. Voltage-115VAC
●Application Residential and Commercial Refrigerators and Freezers, For Use With RSIR, CSIR, PSC, and CSR Compressors, Includes Relay, Overload and Start Capacitor Refrigeration
●Extremely durable,long lasting refrigerators and freesers and easy to install

Installation Instructions

1. Disconnect power supply.

2. Remove old relay and overload.

3.Push terminal connected to white wire on RCO onto start terminal of compessor.

4. Push terminal connected to red wire on RCO onto run terminal of compressor.

5.Push terminal connected to black wore on RCO onto common terminal of compressor.

6.Connect one line wire which was removed from old relay to one of the line wrres of the RCO,using wire nut.

7.Connect other line wire which was removed from the old Overload to other line wire of the RCO,using wire nut.

5. SUPCO SPP6 Relay/Capacitor Hard Start Kit with 500% Increase Starting Torque

SUPCO SPP6 Relay/Capacitor Hard Start Kit with 500% Increase Starting Torque

Feature

Description

Relay/CAPACITOR hard start kit 500% incr starting torque,increased compressor starting torque. Designed for use on permanent split CAPACITOR single phase a/c and heat pump systems. Multiple use includes: room air conditioner units, residential or commercial psc AC units.. the country of origin is china.

6. Raven RCO410 3 in 1 Compressor Hard Start Capacitor Kit for Refrigerators & Freezers 1/4-1/3 H.P. 115VAC

Raven RCO410 3 in 1 Compressor Hard Start Capacitor Kit for Refrigerators & Freezers 1/4-1/3 H.P. 115VAC

Feature

Description

A hard start kit increases the efficiency of your refrigerator or freezer’s compressor. Not only does this extend the life of your compressor, but it also helps you save money on your power bill.
For DIYers, a three-in-one, pre-wired start kit like this one is your best option. It replaces all three electrical components at once, so you don’t have to worry about accidentally damaging the compressor with mismatched parts. Use it with any 1/4 to 1/3 sized compressor.

Fits Several Compressor Types

Use this high-quality exact equivalent hard start kit with nearly any residential or commercial refrigerator system. Compatible compressor types include: RSIR, CSIR, PSC, and CSR.

Installation Instructions

1. Disconnect power supply.
2. Remove old relay and overload.
3. Push terminal connected to white wire on RCO onto start terminal of compressor.
4. Push terminal connected to red wire on RCO onto run terminal of compressor.
5. Push terminal connected to black wore on RCO onto common terminal of compressor.
6. Connect one-line wire which was removed from old relay to one of the line wires of the RCO, using wire nut.
7. Connect other line wire which was removed from the old Overload to other line wire of the RCO, using wire nut.

7. Supco MPR5 Ultra Start Compressor Capacitor Hard Start Kit 1 to 3 HP Compressors 208/230/265V

Supco MPR5 Ultra Start Compressor Capacitor Hard Start Kit 1 to 3 HP Compressors 208/230/265V

Feature

8. RCO210 3 in 1 Hard Start Capacitor Replacement Compatible with Supco Relay Overload 1/12 hp- 1/2 hp Compressors Voltage-115VAC

RCO210 3 in 1 Hard Start Capacitor Replacement Compatible with Supco Relay Overload 1/12 hp- 1/2 hp Compressors Voltage-115VAC

Feature

Description

Specifications

●Replacement for model No. RCO210

●Applications One size for all compressors from 1/12 hp through 1/2 hp. 

●Maximum RLA 13.3 Amps 

●Mounting: Quick Connect HP RATING – 1/2 

●Solid-state Hard-start Relay, includes relay, overload, and start capacitor.

●Provides a boost for hard start and unbalanced systems 

●Prevents low voltage starting problems

●No additional wires required 

●Used For domestic and commercial refrigeration systems and freezers

Installation Instructions

1. Disconnect power supply.

2. Remove old relay and overload.

3. Push terminal connected to white wire on RCO onto start terminal of compessor.

4. Push terminal connected to red wire on RCO onto run terminal of compressor.

5. Push terminal connected to black wore on RCO onto common terminal of compressor.

6. Connect one line wire which was removed from old relay to one of the line wrres of the RCO,using wire nut.

7. Connect other line wire which was removed from the old Overload to other line wire of the RCO,using wire nut.

9. Antoble RCO410 3 in 1 Hard Start Compacitor Kit for Refrigerators 1/4-1/3 H.P. 115VAC

Antoble RCO410 3 in 1 Hard Start Compacitor Kit for Refrigerators 1/4-1/3 H.P. 115VAC

Feature

Description

Specification:

  • Replacement for model No. RCO410 (HS410)
  • For compressor sizes 1/4 through 1/3 H.P. Voltage-115VAC
  • Application Residential and Commercial Refrigerators and Freezers, For Use With RSIR, CSIR, PSC, and CSR Compressors, Includes Relay, Overload and Start Capacitor Refrigeration
  • Extremely durable,long lasting refrigerators and freesers and easy to install

Installation Instructions:

  1. Disconnect power supply.
  2. Remove old relay and overload.
  3. Push terminal connected to white wire on RCO onto start terminal of compessor.
  4. Push terminal connected to red wire on RCO onto run terminal of compressor.
  5. Push terminal connected to black wore on RCO onto common terminal of compressor.
  6. Connect one line wire which was removed from old relay to one of the line wrres of the RCO,using wire nut.
  7. Connect other line wire which was removed from the old Overload to other line wire of the RCO,using wire nut.

Contact Us:

If you are not sure if part is correct, ask us in Customer questions answers section or contact us by visiting the Etotal Global US storefront.

Count on our RCO410 3 n’ 1 start hard start kit! Save your time and money now!

Conclusion

By our suggestions above, we hope that you can found Hard Start Capacitor Kit Freezer for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general