The Best Hurricane Shutter Screws

0
556 reviews analysed

1. The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack

The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack

Feature

Description

Product Description

Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

From the Manufacturer

Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

2. The Hillman Group 831494 1/4 X 2-Inch Stainless Steel Hurricane Bolt, 100-Pack

The Hillman Group 831494 1/4 X 2-Inch Stainless Steel Hurricane Bolt, 100-Pack

Feature

Description

Product Description

Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

From the Manufacturer

Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

3. Hard-to-Find Fastener 014973320898 Combo Truss Machine Screws, 1/4-20 x 1-1/2, Piece-100

Hard-to-Find Fastener 014973320898 Combo Truss Machine Screws, 1/4-20 x 1-1/2, Piece-100

Feature

Description

We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.

4. Simpson Strong Tie SPS25344-KT Storm Panel Screw, 305 Stainless Steel, 25 Screws, Wing Nuts and Caps and 1 Hex Driver Bit, 1 Carbide Drill Bit

Simpson Strong Tie SPS25344-KT Storm Panel Screw, 305 Stainless Steel, 25 Screws, Wing Nuts and Caps and 1 Hex Driver Bit, 1 Carbide Drill Bit

Feature

Description

Product Description

Ideal for attaching storm panels to wood, concrete and masonry

From the Manufacturer

Ideal for attaching storm panels to wood, concrete and masonry

5. CONFAST 1/4" (Inside/Screw 1/4-20 Diameter) Machine Screw Anchor with 1 Setting Tool (100 per Box)

CONFAST 1/4" (Inside/Screw 1/4-20 Diameter) Machine Screw Anchor with 1 Setting Tool (100 per Box)

Feature

Description

Applications
The anchor is made from Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Moist environment.

Head Style
The anchor is a head

Hole Diameter/Bit Diameter
The anchor requires a 1/2″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Driver Required
A is required for driving the anchor into the base material.

Diameter of Anchor
The diameter of the anchor is 1/4″.

Length Anchor
The length of the anchor is 7/8″

Thread Length
The length of the threads on the anchor is in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 7/8″. Therefore, the anchor must be installed so that a minimum of 7/8″ of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is . This will ensure that the minimum embedment of 7/8″ will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 9/16″.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 5″ from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 2-1/2″ from an unsupported edge of the concrete.

6. 1/4 x 2-1/4" Tapcon Storm Guard Anchors White Ultrashield (50)

1/4 x 2-1/4" Tapcon Storm Guard Anchors White Ultrashield (50)

Feature

Description

Item Package Quantity:50

Direct mount permanent anchors for quick and easy installations of metal and plywood panels to concrete and block. 3/16″ Hex Drive for installation (tool sold separately). Use with 3/16″ carbide-tipped drill bit. No caulking required.

7. 12 Pack White High Velocity HV Thumb Screws 3/8-16 x 3/4" for Hurricane Shutters by BMB FastSupply

12 Pack White High Velocity HV Thumb Screws 3/8-16 x 3/4" for Hurricane Shutters by BMB FastSupply

Feature

Description

These thumb screws are not universal and may not fit every shutter application. Please verify the thread size with your shutter manufacturer before purchase. We have clearly identified the thread size and threads per inch within this listing. If you purchase this item and it does not fit your application we will happily approve a return. Please do not use the defective item or inaccurate website description options if you can not or have not confirmed the thread size required for your application. Hurricane Shutter HV Thumb Screws, White 3/8-16 x 3/4″, with Shoulder. Made with Acetel Nylon. Total length is 1 5/8″, the threads are 3/4″ long. Thread diameter is 3/8″, Thread count Per Inch (TPI) is 16. HV = High-Velocity and UV resistant, will withstand the high velocity winds associated with inclimate weather conditions. (Heavy Duty) these are very strong, typically used with Locking Pins.

8. WIDGETCO 1/4" x 1" Screw Thread Protectors, White – Works w/Many Hurricane Shutters

WIDGETCO 1/4" x 1" Screw Thread Protectors, White - Works w/Many Hurricane Shutters

Feature

Description

Size Name:Quantity 100

1/4 inch x 1 inch White Screw Thread Protectors fit 1/4 inch (1/4-20) screws and bolts. Simply slide over the threaded end of the screw or bolt. Functions as a Thread Protector, Mask (for painting), Insulator, Decorator, Seal or to Color Code. Ideal for Hurricane Shutters.

9. CONFAST 1/4" x 3-1/4" Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to Masonry, Block or Brick (100 per Box)

CONFAST 1/4" x 3-1/4" Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to Masonry, Block or Brick (100 per Box)

Feature

Description

Applications
The anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Dry environment.

Head Style
The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 3/16″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Driver Required
A 5/16″ is required for driving the anchor into the base material.

Diameter of Anchor
The diameter of the anchor is 1/4″.

Length Anchor
The length of the anchor is 3-1/4″

Thread Length
The length of the threads on the anchor is 1-3/4″ in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 1″. Therefore, the anchor must be installed so that a minimum of 1″ of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-3/4″ to 2-1/4″. This will ensure that the minimum embedment of 1″ will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 5/16″.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 4″ from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3″ from an unsupported edge of the concrete.

10. YEJI 25 Pcs #8 White Screw Thread Protectors

YEJI 25 Pcs #8 White Screw Thread Protectors

Feature

Description

Please confirm the size your need before you buy it.

Conclusion

By our suggestions above, we hope that you can found Hurricane Shutter Screws for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general