Finding your suitable readers for z wave appliance plug is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for z wave appliance plug including detail information and customer reviews. Let’s find out which is your favorite one.
940 reviews analysed
1. Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More
Feature
- POWERFUL PLUG: The only Z-Wave Plug that lets you safely control and monitor heavy-duty 110V appliances from your Z-Wave smart home system. Connect your refrigerator, humidifier or dehumidifier, AC unit, fan, sump pump, or a gas clothes dryer to Z-Wave. NEW: 45 degree angled plug so you can fit 2 Smart Switches in a single receptacle!
- POWERFUL Z-WAVE: With built-in Z-Wave Plus signal repeater and range test tool, the Power Switch will boost your whole Z-Wave network while keeping it protected with AES signal encryption.
- POWERFUL CONTROL: Monitor energy use of connected appliances in live mode or over time with W, kWh, A, and V reports (your Z-Wave hub needs to support this feature). Quick status reports to the controller and on/off state recovery after power failure.
- POWERFUL HARDWARE: Made from high-quality components that will last, even when it’s very cold or very hot (14° – 104°F, indoor use only). ETL certified: complies with North American electrical safety standards. Extra-thick flexible cord is perfect for installations with no immediate access to a receptacle.
- COMPATIBILITY: Use the Power Switch with any certified Z-Wave gateway for simple on/off control (Wink, Z-Wave alarm panels). Advanced settings and energy monitoring available for open systems only, including Vera, SmartThings (custom device handler required, contact seller first), HomeSeer, and Fibaro Home Center Lite.
2. GE Enbrighten Z-Wave Plus Smart Plug, 1 Grounded Outlet, On/Off Switch for Lighting & Appliances, Built-in Repeater/Range Extender, Zwave Hub Required, Works with SmartThings Wink and Alexa, 28169, White
Feature
- Wirelessly schedule and control any lamp or small appliance from anywhere, at any time with any mobile device.
- Up to 50% improved wireless range, 250% faster processor, 400% more memory and energy efficiency over Z-Wave Classic products.
- Space-efficient design does not block second outlet or obstruct furniture placement.
- Requires a Z-Wave certified gateway, providing remote access from any mobile device.
- Compatible with the following Z-Wave certified Hubs: SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, Home Seer, Smart Security, Harmony, Vera, Connect and Iris.
Description
Wirelessly schedule and control any lamp or small appliance from anywhere, at any time with any mobile device.
3. Leviton DZPA1-2BW Decora Smart Plug-in Outlet with Z-Wave Plus Technology, White, Works with Alexa
Feature
- Works with Alexa for voice control (hub required, Alexa device and hub sold separately)
- Z-Wave Plus certified – compatible with popular hubs including SmartThings and Wink
- Provides 15A, 120 VAC NEMA 5-15R grounding receptacle for use with a wide variety of lamps and appliances
- Scene and zone control integration. Designed for residential applications of up to 7,500 square feet
- Protected memory maintains ON/OFF status of loads and during minor power fluctuations
Description
Schedule your plug-in lamps, holiday lighting or small appliances to turn on/off from anywhere using a compatible Z-Wavecontroller. Installation is simple and requires no new wiring – simply plug in the device and enroll it to the hub. Features two-way status updating for immediate notification and precise automation scheduling. Reduce energy consumption, provide automated plug-load control based on schedules with a compatible hub, and utilize the wireless affordable plug-in for automating small appliances. Leviton Z-Wave products make it easy to bring today’s technology into your home. For wireless control of lamps, small appliances, holiday lighting and more, Z-Wave Plug-Ins are the smart solution for today’s lifestyle. The Plug-In Outlet with Z-Wave Plus Technology (DZPA1) is ideal for any residential setting where remote ON/OFF switching of appliances, motor loads up to 1/2 HP, or freestanding lights, including LED, Incandescent, Inductive Voltage, Fluorescent and Compact Fluorescent loads is needed. Typical applications include switching of lamps, portable fans, kitchen appliances, indoor fountains and more. Also allows users to incorporate small appliances into scene and zone home control applications. DZPA1 is for use with Z-Wave enabled hubs like the Samsung SmartThings, to help facilitate a comprehensive smart home. If you do not wish to use a hub but still desire voice controls and select third-party device integration, Leviton recommends the DW15A.
4. NEO Z-Wave Plus Smart Mini Plug Z-Wave Outlet On/Off Plug-in Switch Home Automation, Work with Wink, SmartThings, Vera, Fibaro & more, Green (1PK)
Feature
- ◆ ON/OFF CONTROL &
- ENERGY USAGE: No matter when you are in, you can easy switch all appliances with smartphone. Energy Saving with timer on/off features that can make your appliances more convenient and intelligent. Use the power measurement feature along with the option to automatically cut power to certain devices when you’re not using them in order to save energy.
- ◆ OVERLOAD REMIND SAFETY GUARD: Overvoltage protection. If the load current is greater than the maximum current, the device will send a signal to the smartphone through the gateway to remind the user of the power consumption and prent the fired hazard.
- ◆ SMART PLUG SMART LIFE: The most universal smart home devices. To connect the smart plug to Z-wave network with gateway, through the Smartphone App you can remote control your home appliances anytime, anywhere. Any detected use of energy can prompt the system to immediately send a notification to your smartphone.
- ◆ SMART HOME FULL GUARD: Support multi-device controlled, can be working interactively with other Z-Wave sensors via the gateway. Enjoy your smart home with the smart plug. Automate your home to provide you with the highest possible level of comfort and security.
- ◆ Z-WAVE TECHNOLOGY: Z-Wave Plus Certified and integrates with most Z-Wave Certified hubs. e.g. SmartThings, Fibaro, Vera, Zipato, HomeSeer, Iris and Aeotec.
5. Outdoor Z-Wave Plus On/Off Light and Appliance Plug, 1 On/Off Outlet+ 1 Alway On Outlet, Zwave Hub Required, Works with SmartThings, Wink, Alexa (ZW96)
Feature
- Z-Wave outdoor plug, Requires a Z-Wave certified hub/ gateway. Compatible with SmartThings, Wink, Vera, Fibaro and so on.
- Features one Z-Wave smart outlet and one “Always-On” outlet, with two integrated weather-resistant outlet covers that protects module from dirt and debris when not in use.
- Wirelessly schedule and control your home’s outdoor lighting and appliances, works with LED, CFL, halogen and incandescent bulbs and other devices. Supported voltage – 120 VAC, total load is max 15Amp.
- Works with Alexa for voice control: Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately). Cannot connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).
- CERTIFICATIONS: IP65 waterproof Rated for Outdoor Use, Z-Wave Plus and FCC Certified.
6. HAOZEE Z Wave Plus Mini Smart Power Plug Home Automation Zwave Outlet,Z Wave Range Extender,Energy Monitoring,Works with Wink,SmartThings & more ¡
Feature
- ➤Instant Wireless Control:Control lamps and small appliances wirelessly with your smart phone or laptop.
- ➤Energy Efficient:Monitor energy consumption in live mode or over time. Save on bills and enjoy a more efficient home.
- ➤APPLICABLE TO MULTIPLE HOSTS:the Sensor is compatible with following brand alarm host:Fibaro/Vera/Zipato/Wink.It can’t work alone and need work with their alarm host.In the Z-wave network communitcaions,power plug can be connected to any z-wave main controller.
- ➤Complete Customization:Build your own schedules and events designed around your needs. Use advanced configurations to allow or disable manual control of the plug. Set the timer to turn appliances off automatically.
- ➤Simplest Set Up:Installation is virtually instant, and a compact size gives full access to the second outlet in a standard receptacle.
7. Z-Wave Smart On/Off Light and Appliance Plug, Dual Outlet Plug-in, 1 Alway-On+ 1 Smart, Built-in Zwave Repeater, Zwave Hub Required, Works with SmartThings, Wink
Feature
- Hassle-free Operation-Plug the smart outlet in, control lights from anywhere, schedule a timed event or create a custom scene from anywhere in the world, at any time of the day.
- Two Outlet-This outlet contains 1 Always-On outlet+1 Z-wave outlet, which is more flexible and convenient to use.
- Plug and Play-No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient ON/OFF functions. The wall plug adds to your Z-Wave hub in minutes.
- Voice Control-Works with Alexa for voice control (Alexa device and hub sold separately). Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris.
- Once plugged in, the Wall Plug acts as a signal repeater that strengthens Z-Wave signals and boosts connectivity between hub and devices. NOTE: Z-Wave gateway controller required- sold separately.
8. ZLINK, ZL-PA-100, Z-Wave Plus Plug-In Appliance and Lightning Module; SmartStart, S2 Security, Compatible with Alexa, Google Home, SmartThings, Wink, Vera and others
Feature
- SUPPORTS: Z-Wave Plus, Z-Wave S2 Security, and SmartStart for an easy and secure inclusion
- INPUT: 120VAC, 60Hz, 15A
- Z-WAVE: US Region, 908.4MHz, 916MHz
- MAX LOAD: 900W Incandescent, 200W CFL/LED, 1/2 HP Motor, 15A Resistive
- WORKS WITH: all Certified Z-Wave Controllers
- AMAZON ALEXA READY: Tell Alexa to turn on the lights or shut off the appliances when used with a Compatible Z-Wave Smart Hub.
Description
From the manufacturer:
ZLINK – The same great performance and quality of other well-known brand names: GE; Lutron; Leviton; Cooper; without the expensive cost of branding. ZLINK, one of the first to bring important features such as Security S2, the latest in Z-Wave network security and SmartStart, simple scan-and-go, and installation to the market. ZLINK: high quality; fantastic price; industry leading features, performance and warranty.
Product Description:
ZL-PA-100 is designed to provide easy Z-Wave control for plug-in appliances and lighting that require On/Off operation. Simply plug the ZL-PA-100 into any standard outlet and the appliance or lamp you wish to control, up to 1800W, into the ZA-PA-100. Add to your Z-Wave network and enjoy custom scenes and scheduled timed events when you’re either home or away.
Product Features:
Wirelessly schedule and control any lamp or small appliance
Supports S2 and SmartStart for easy, secure inclusion
Space-saving design does not block second outlet or obstruct furniture placement
One switched outlet
Plug-in anywhere indoors
Large back lit button for local control
Works with all Certified Z-Wave Controllers
Internal resettable fuse to protect from surge current
9. Aeotec Smart Switch 6, Z-Wave Plus Wireless Control Plug for Home Security Automation, 15A Mini Size, Monitor Power, New Design without USB port
Feature
- Automate/schedule your home appliance with on/off control. Smart Switch 6 controls up to 15 amps and monitors real-time power consumption with a variable color LED ring and reports the data to the gateway system.
- Built-in features include surge protection for a safer home and signal repeater to improve the communication between the other Z-Wave devices.
- Sleek & minimal. It’s Aeotec’s newer design with all the powerful features packed in the tiny size of 2.20 x 2.20 x 1.96 (1.38) inches.
- Tested to work with Z-Wave gateways including Samsung SmartThings, Vera, Webee, Wink-hub, Zipabox, Universal Devices ISY994Zw, openHAB, Open Z-Wave, Oomi, Jeedom, Indigo 7, InControl, HomeSeer, Home Assistant, eedomus, Abode and more.
- Z-Wave Plus certified for quicker response time, better wireless range, and additional wireless security encryption. Z-Wave certification number: ZC10-15050012.
Conclusion
By our suggestions above, we hope that you can found Z Wave Appliance Plug for you.Please don’t forget to share your experience by comment in this post. Thank you!
